How Do I Fix My Bed Frame Center Support

Table of Contents

Do you want to fall while having a dream with your beloved one? The fragile center support leads to an unwanted accident. Many of us had the incident once in life. So how do I fix my bed frame center support?

If you have noticed that your bed is sagging in the middle or wobbling excessively, it could be due to a problem with the center support of the bed frame. In such a case, it is essential to fix the center support of your bed frame to ensure that your bed remains sturdy and comfortable. 

In this blog, we will take you through the step-by-step process of fixing the bed frame center support. But first, let’s crawl through the definitions and material list to perform the job perfectly.

What is Bed Frame Center Support?

The bed frame center support is a set of beams that runs down the center of the bed frame and provides support for the mattress. The center support plays a crucial role in distributing the weight of the mattress and occupants evenly across the bed frame. 

A sturdy and well-designed center support will ensure that the bed remains stable and comfortable. However, if the center support is damaged or not properly installed, it can lead to problems with the bed frame, such as wobbling or creaking. 

How Do I Fix My Bed Frame Center Support?

Well, time to give you a step-by-step guide on how do I fix my bed frame center support when I need it. There are two methods that worked for my case. So here is how I did fix my bed frame center support the last time. 

Method 1: How Do I Fix My Bed Frame Center Support

Do you have flexible center support under your bed? you can reinforce it by using a piece of wood similar to the center support.

Materials Needed

  • Tape measure
  • Drill machine
  • 3/8″ drill machine bit
  • 1 and 1/2″ wood screws
  • Level and hex saw.
  • The center support bracket

Step-by-step Guide

  1. Ensuring a Strong Enough Center Support

First, determine whether the center support is sturdy enough to hold the whole weight. Just reinforce it if you do not feel it strongly.

  1. Observing The Height

Now, use the tape measure to calculate the height of the center support. The thickness of the mattress and box spring that you are using will help you know the exact height.

  1. Cutting The Wood

Now, use a hex saw to cut a piece of wood to the appropriate height. Make sure the wood is as wide as the center support minimum.

  1. Attaching Center Support

Put a 3/8″ drill bit on your drill machine head to drill holes into the wood. After that, Then, use 1 and 1/2″ wood screws to connect the piece of wood to the center support. 

  1. Leveling The Support

Now, check the level of the center using the level. It must be straight enough so that you can lie in good condition.

5. Attaching Center Support Bracket (Optional)

For extra protection, you can attach a center support bracket to the wooden piece. So you get a durable bed frame center support.

Method 2: How Do I Fix My Bed Frame Center Support

How do I fix my bed frame center support when my bed doesn’t have a center support? Well, the fastest way is adding a support board which will prevent wobbling. So do the following tasks.

Materials Needed

  • 3/4 inch plywood
  • Four L brackets
  • Eight ¾ inch screws
  • Drill machine
  • Screwdriver
  • Hex Saw

Step-by-step Guide

  1. Match The Plywood Width

Collect a ¾ inch of plywood from the market, then match the plywood with your bed frame with width. It must be in the correct width. Do not make the plywood extra large or small.

  1. Cut The Plywood

Now cut the plywood after you have measured it. Use the hex saw to make a smooth edge cut. Use sandpaper to even it if needed. Go to someone else if you do not have the cutting tool.

  1. Attaching The L Brackets

Next, drill four holes in each corner of the plywood and connect the L bracket using screws. Tighten them properly so that they do not come off over time.

  1. Placing Support Board

You are near the end! Now, Center the support board in the middle of the bed frame. Attach it with the screws and tighten it as most as you can. Done!

There are many ways to fix the bed frame center support, although these two methods are the easiest and most effective ones.

Things to Consider Before Knowing How I Fix My Bed Frame Center Support

  • Go for a check to determine the source of the problem because sometimes the frame has problems.
  • Determine the type of damage, whether it is wear and tear or from accident.
  • Contact a professional in case of serious damage.
  • Check the proper tools and materials for the job, otherwise, it can break your bedframe.

I hope this will answer your question, “How do I fix my bed frame center support?” We have provided you with two methods. But make sure that you take enough time to repair the bed frame center support. Do not make any rush, because that can make more damage unintentionally. 


How do you fix a broken bed frame support with glue?

smooth down the edges around the crack for a cracked bed slat. Then, apply wood glue and wait for it to be dried overnight. After having it dried, reinforce the slat by gluing a piece of plywood. Just make the plywood similar in width.

Do I Need A Bed Frame with Center Support?

Center Supports provide required support after putting the boxspring and mattress on your bed frame. If your bed does not come with an additional center support system or legs, you must install the center support yourself. You can use a thin plywood board to strengthen the bed frame center frame with some tools.